Machine Library

I've created a library targeting the hardware specific aspects of programming the Sbc-3. I believe that it should work with the other boards from Mega Micros, but since I don't have access to anything but the Sbc-3, can't confirm that.

To use the library, just include the following in your C sourcecode:

#include <machine.h>

Serial I/O

int _char_available(void);
char _getchar(void);
void _putchar(char c);

LED Control

There's a block of 10 leds (LD7 on the SBC3-b3), and six of them can be used for anything you like. Led1 is furthest from the cpu:

Two functions are provided, one to turn on a led, and another to turn it off.

void set_led(int lednum);
void clear_led(int lednum);

Where lednum is an integer in the range of 5 through to 10, as per the table above. Any other value will be silently ignored.

PI/T

void _pit_reset(void);
unsigned int _pit_get_counter(void);
unsigned int _pit_set_counter(unsigned int);

Compact Flash

void _cf_wait_busy(void);
void _cf_wait_data(void);
void cf_init(void);
int cf_read(uint8_t drive_num, uint32_t sector, uint8_t *buffer);

Vectors and Interrupts

unsigned int *_get_vectors_base(void);
unsigned int get_isr_vector(int vector_number);
unsigned int set_isr_vector(int vector_number, void isr(void));

I^2^c Bus