commit 10c0f2

2026-09-14 09:12:31 Bob Green: -/-

0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9

`hardware/acrtc-3.md` ..
@@ 2,9 2,17 @@

	## Board Tweaks
	On the v1.0 ACRTC-3 board, some tweaks are required to the board:
-	- Omit IC9 completely and install only two jumpers into the header as shown: ![image-1789372881976.png](./image-1789372881976.png)
+	- Omit IC9 completely and install only two jumpers into the header as shown:
+	-
+	- ![image-1789372881976.png](./image-1789372881976.png)
	- Add the three wire links as shown:
+
	![image-1789372956960.png](./image-1789372956960.png)
+
+	Note, in conversation with Steve at Mega Micros, it seems that the mods outlined above do not play nicely with all monitors. If this is the case, then an adapter board with an appropriately programmed ATF750C device can be installed in IC9's socket:
+
+	![ic9.png](./ic9.png)
+
	## Attachments
	- [schematic.pdf](./schematic.pdf)
	- [bom.pdf](./bom.pdf)